![]() |
Warped yellow totes
1 Attachment(s)
We ordered a yellow tote for AndyMark. The underside lip is warped. Has anyone else noticed this?
|
Re: Warped yellow totes
I noticed that our yellow tote is warped, compared to our gray tote and last year's black tote.
|
Re: Warped yellow totes
We've experienced the same issue on our gray totes. The warping was so bad that one of our prototypes that used flexible clips couldn't fit into the gap.
|
Re: Warped yellow totes
Our grey tote is like this. I am not sure about the yellow.
|
Re: Warped yellow totes
We noticed that all 3 of the totes (all were gray) that we ordered from andymark had this issue. The totes that we got in out KoP were fine.
|
Re: Warped yellow totes
We had this issue with one of our old totes. Our KOP totes and the rest of our old ones worked fine with our "hand". We don't have our lift working yet (just got the parts in), so we haven't looked that closely at the ones we bought to practice clearing the landfill and work on an auto TOTE STACK; I'll have to check them out at tomorrow's session. I wonder if a heat gun and a pry bar could get them back into shape -- at least on our old one, there's not much to lose, is there?
|
Re: Warped yellow totes
Quote:
|
Re: Warped yellow totes
This is unacceptable. You would think that with all the time and money that goes into FIRST that they would get game piece that has no variation and functions brand new without need of heat guns or pry bars. For all the talk about wanting to become like the major sports, you'd never see this from the pros.
EDIT: I guess some people missed the sarcasm.. |
Re: Warped yellow totes
So I'm guessing that your robot-builder-cave does not have TV or Internet, you've missed an entire week of "Inflategate" in the NFL :rolleyes:
|
Re: Warped yellow totes
Quote:
I don't know how this wouldn't be expected though. If you were around for 2012, think about the difference in stiffness of foam balls. Or 2013 after one team got their shooter on a frisbee it was never the same again. Build tolerance into your design so this isn't an issue and it won't be an issue. |
Re: Warped yellow totes
Quote:
|
Re: Warped yellow totes
I think Game Piece variation is part of the design challenge...
|
Re: Warped yellow totes
Also look at the bottom. Some are flat, some are convex, concave, and a combo. This affects the velocity leaving the chute and the bounce on impact. Loading from the human player station needs to deal with this.
|
Re: Warped yellow totes
Quote:
Game piece and field variation are part and parcel of every sport, unless every event carries calibrated and reliable measuring apparatus. |
Re: Warped yellow totes
We are going to be bringing our pressure gauge to make sure the totes are inflated to between 12.5 -13.5 psi climatic conditions not withstanding. #deflategate
|
Re: Warped yellow totes
I haven't seen a tote that we got bad enough where our finger prototype couldn't get into the little lip...maybe some of you guys got the worst of the worst?
-Ronnie |
Re: Warped yellow totes
Game piece variation is something you absolutely must design for, and that's been true for as long as I've been doing FIRST (and presumably about a decade longer!)
|
Re: Warped yellow totes
Quote:
THANKS CD! |
Re: Warped yellow totes
The one thing I was concerned about this year was the lip/handle everyone was attracted. The first problem I saw was by the time we see competition in week 6 totes on the field will be warped. The handles could be bent out or worse. The only real constant is the general shape of the tote and recycling bin.
|
Re: Warped yellow totes
What's the narrowest gap anyone has seen? We have about 5/32" at the narrowest point on ours.
|
Re: Warped yellow totes
We have a 1/8" thick "grabber". I guess we'll see how it does...
|
Re: Warped yellow totes
Quote:
Be aware that this doesn't apply to variation from the manufacturing process- unless a tote is significantly malformed due to an obvious manufacturing error, it probably wont be replaced. |
Re: Warped yellow totes
Interesting observation. I will check ours tonight and see what it looks like!
Quote:
|
Re: Warped yellow totes
I wonder when we'll get the word that some of the game pieces are going to be a different model, because they ran out of the right ones and can't get them any longer? :p
|
Re: Warped yellow totes
Quote:
|
Re: Warped yellow totes
Quote:
Quote:
As a sidenote, can I just say how fantastic it is that this is a game piece which teams will actually have a real use for at the end of the year! That said, 2014 balls and 2013 discs were actually fairly useful at the end of the year... a vast improvement over 2009 'moon rocks' anyway. |
Re: Warped yellow totes
I also saw that warping in the lip area on the tote that we got last year's KOP in. We plan to make the hook extra-narrow and tapered to accommodate it.
It's very good that we got to experience totes with warped lips now, rather than assume that none of them would be warped. |
Re: Warped yellow totes
As far as I can tell, the warping is cause by the way they are shipped. When we got our 3 yellows and 1 grey, they were nested, with the yellow lids opened and strapped to the sides. The only thing I can think of is that the hinge points were pressing on the lips due to the tightness of the straps. Neither kit tote had this issue. So far we haven't had to much issue with our lip picker.
|
Re: Warped yellow totes
I asked.
Quote:
1. don't rely on the shape of the features on the long edge of the tote, particularly the presence or absence of vertical flanges. 2. The supply of totes at the competition won't be unlimited, so "suitability" will ultimately resolve to "play the best ones we have". Those participating in later weeks of the competition can pay attention to week 1 and adjust accordingly. |
Re: Warped yellow totes
I'm pretty sure if all the game pieces were the exact same for every competition it would make the competition considerably easier, which I don't think is what they are trying to do. :rolleyes:
|
Re: Warped yellow totes
#totegate
|
| All times are GMT -5. The time now is 22:23. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi