Chief Delphi - Linear Actuator [ modifying it for use with CIM motors]

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Linear Actuator [ modifying it for use with CIM motors] (http://www.chiefdelphi.com/forums/showthread.php?t=133608)

icecold10400

28-01-2015 11:56

Linear Actuator [ modifying it for use with CIM motors]

Our team's robot is highly based off the robot in three days design. The only problem is that one of main components is a a Linear actuator. The DART Linear Actuator is always out of stock. SO for the teams that have used a Linear c
Acuator before and have modified it for your robot, do you have any tips for tricks for a new team.

Spirator

01-02-2015 21:04

Re: Linear Actuator [ modifying it for use with SIM motors]

Do you have a supplier and part number for the actuator you plan on modifying?

All times are GMT -5. The time now is 14:03.