Chief Delphi - Issues with the Gyro

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Java (http://www.chiefdelphi.com/forums/forumdisplay.php?f=184)

- - Issues with the Gyro - Help (http://www.chiefdelphi.com/forums/showthread.php?t=133662)

Issues with the Gyro - Help

Hey!

We've been trying for hours to fix the issue with our Gyro and we're not sure whether it's a software issue or hardware issue.

Here is our wiring (i only posted links since they are huge images):

http://i.imgur.com/ChcTKaV.jpg

http://i.imgur.com/6MXDKSq.jpg

As we rotate our gyro, we're expecting the gyro pointer to move but it isn't:
http://puu.sh/fcJgn/209d7ff45f.jpg (when we are connected to joystick/communication/code)

This is our code snippet for the gyro to drive forward straight and to drive backwards straight.
Btw, the gyro.reset(); is already called before this thread starts.

Code:

        

        public double gyroSensitivity = 0.05; // (voltage / 1000)



        public void run() { // This method is executed only for DriveForward and

                                                // DriveBackward

                r.autonomousCounter = 0;

                r.theRobot.setExpiration(0.1);

                while ((Math.floor(r.autonomousCounter / r.loopsPerSecond)) <= DriveClass.seconds) {

                        if (RecycleRush.InTeleop) {

                                break;

                        }

                        if (forward) {

                                r.theRobot.drive(r.robotDriveSpeed, -r.gyro.getAngle() * r.gyroSensitivity);

                        } else if (!forward) {

                                r.theRobot.drive(-r.robotDriveSpeed, -r.gyro.getAngle() * r.gyroSensitivity);

                        }

                        Timer.delay(r.timerDelay);

                }

                r.theRobot.drive(0.0, 0.0);

        }

It drives forward, but does not drive complete straight - same for backwards.

We also made code to make it rotate while its stationary.... We made two methods, one of which we deprecated for now because we found simpler logic.

Code:

        public void DriveRotate(int rotateAngle) {

                r.queueThread(new Runnable() {

                        public void run() {

                                r.gyro.reset();

                                while (r.gyro.getAngle() < rotateAngle) {

                                        r.theRobot.drive(0.0, 1);

                                }

                                r.theRobot.drive(0.0, 0.0);

                        }

                });

        }

        

        /* DEPRACATED METHOD

        public void DriveRotate(int rotateAngle) {

                r.queueThread(new Runnable() {

                        public void run() {

                                r.gyro.reset();

                                double angleHeader = r.gyro.getAngle(); // Initial Angle

                                while (Math.abs(angleHeader - r.gyro.getAngle()) <= Math.abs(rotateAngle)) { // Rotating

                                        r.theRobot.drive(0.0, rotateAngle * r.gyroRotationSpeed);

                                        DriverStation.reportError(r.gyro.getAngle() + "", true);

                                        Timer.delay(r.timerDelay);

                                }

                        }

                });

        }*/

We have the Gyro connected to: 0 so this is our declaration:

Code:

    // Gyro - Handles Trajectory Paths

    public int GyroChannel = 0;

    public Gyro gyro = new Gyro(GyroChannel);

Basically, the Gyro isn't working in any way.

Re: Issues with the Gyro - Help

Quote:

Originally Posted by TeamMarcies (Post 1435766)

Code:

        

        public double gyroSensitivity = 0.05; // (voltage / 1000)



        public void run() { // This method is executed only for DriveForward and

                                                // DriveBackward

                r.autonomousCounter = 0;

                r.theRobot.setExpiration(0.1);

                while ((Math.floor(r.autonomousCounter / r.loopsPerSecond)) <= DriveClass.seconds) {

                        if (RecycleRush.InTeleop) {

                                break;

                        }

                        if (forward) {

                                r.theRobot.drive(r.robotDriveSpeed, -r.gyro.getAngle() * r.gyroSensitivity);

                        } else if (!forward) {

                                r.theRobot.drive(-r.robotDriveSpeed, -r.gyro.getAngle() * r.gyroSensitivity);

                        }

                        Timer.delay(r.timerDelay);

                }

                r.theRobot.drive(0.0, 0.0);

        }

Code:

        public void DriveRotate(int rotateAngle) {

                r.queueThread(new Runnable() {

                        public void run() {

                                r.gyro.reset();

                                while (r.gyro.getAngle() < rotateAngle) {

                                        r.theRobot.drive(0.0, 1);

                                }

                                r.theRobot.drive(0.0, 0.0);

                        }

                });

        }

        

        /* DEPRACATED METHOD

        public void DriveRotate(int rotateAngle) {

                r.queueThread(new Runnable() {

                        public void run() {

                                r.gyro.reset();

                                double angleHeader = r.gyro.getAngle(); // Initial Angle

                                while (Math.abs(angleHeader - r.gyro.getAngle()) <= Math.abs(rotateAngle)) { // Rotating

                                        r.theRobot.drive(0.0, rotateAngle * r.gyroRotationSpeed);

                                        DriverStation.reportError(r.gyro.getAngle() + "", true);

                                        Timer.delay(r.timerDelay);

                                }

                        }

                });

        }*/

We have the Gyro connected to: 0 so this is our declaration:

Code:

    // Gyro - Handles Trajectory Paths

    public int GyroChannel = 0;

    public Gyro gyro = new Gyro(GyroChannel);

Basically, the Gyro isn't working in any way.

Where are your signal wires? is it the red/black wire that's sideways? id recommend using pwm wire. but anyways, can you preform an analog read on the rate pin and post your results?

Re: Issues with the Gyro - Help

Just reporting back in to say we have resolved the situation! Thanks for the help!

Re: Issues with the Gyro - Help

If you don't mind, could you post how you solved the problem? I was having similar issues.

Re: Issues with the Gyro - Help

yes, please tell us how you resolved this!!!