Chief Delphi - pic: TALEN-A Talon SRX breakout board top view

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: TALEN-A Talon SRX breakout board top view (http://www.chiefdelphi.com/forums/showthread.php?t=133749)

pic: TALEN-A Talon SRX breakout board top view

Re: pic: TALEN-A Talon SRX breakout board top view

Very nice. Why did you go with male pins on the board? I always worry about swarf shorting the pins out.

Do you put this on all your SRX devices so they are all the same?

Re: pic: TALEN-A Talon SRX breakout board top view

That's the problem with building a plywood robot... you don't think about swarf shorting things.

Re: pic: TALEN-A Talon SRX breakout board top view

I chose the same male PWM connectors that are on the roboRIO, because they are the standard connectors that every team already has dozens of cables to fit. The encoder connectors take the same plug on both ends of the cable, so you only have to buy one type of plug for the cables.

The board can be populated with any 0.1" pitch connectors you like.

Re: pic: TALEN-A Talon SRX breakout board top view

Quote:

Originally Posted by MrForbes (Post 1436475)

That's the problem with building a plywood robot... you don't think about swarf shorting things.

Good point, but here on the East Coast we call plywood swarf "saw dust":rolleyes: but I saw what you did there....

Quote:

Originally Posted by nixiebunny (Post 1436481)

Makes good sense, thanks for the thought process behind the design.