Chief Delphi - Planing Thick-Wall Aluminum

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Planing Thick-Wall Aluminum (http://www.chiefdelphi.com/forums/showthread.php?t=133979)

AllenGregoryIV

05-02-2015 14:49

Re: Planing Thick-Wall Aluminum

Quote:

Originally Posted by Andrew Schreiber (Post 1438824)

Battery?

Andrew have you been holding out on us? Is there a legal 30lb battery some where?

Andrew Schreiber

05-02-2015 14:51

Re: Planing Thick-Wall Aluminum

Quote:

Originally Posted by AllenGregoryIV (Post 1438827)

Andrew have you been holding out on us? Is there a legal 30lb battery some where?

I mean, that's prolly some of it... maybe the other part is just rounding error? I unno.

GeeTwo

05-02-2015 15:05

Re: Planing Thick-Wall Aluminum

Quote:

Originally Posted by AllenGregoryIV (Post 1438810)

Am I missing something or does that add up to 150lbs? The weight limit is 120lbs.

Quote:

Originally Posted by Andrew Schreiber (Post 1438824)

Battery?

I was thinking about the battery, but I realize that still only adds up to about 133 lb. I think we calculated this number when we were selecting wheels, and had to consider the weight of the robot plus battery plus a full load of 6 totes and maybe an RC. Thanks for the recalibration!

All times are GMT -5. The time now is 16:12.

Page 2 of 2

Show 100 post(s) from this thread on one page