Chief Delphi - Protruding Objects

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Protruding Objects (http://www.chiefdelphi.com/forums/showthread.php?t=134042)

BrighidKHeh

05-02-2015 17:01

Protruding Objects

Are we allowed to have pieces permanently protruding from the robot, outside the robot base frame, as long as the pieces are inside of the perimeter parameters stated in the rules?

baumgartensam

05-02-2015 17:07

Re: Protruding Objects

Yes. That is fine. There are no rules saying your mechanisms must be within your robot's base.

As long as your robot follows R3 B, you are fine:

Quote:

B. the ROBOT must be able to be arranged into a TRANSPORT CONFIGURATION with dimensions which do not exceed 28 in. wide, 42 in. long, and 78 in. tall.

All times are GMT -5. The time now is 14:00.