Two Motors Under One Motor Controller
 

Can we put two CIMs or two BaneBots on one motor controller like a Talon SRX or Victor SP or Spike?

Re: Two Motors Under One Motor Controller
 

See rule R42 and Table 4-4 of the game manual.


Hint: No you cannot.

Re: Two Motors Under One Motor Controller
 

The rule book is your friend.

Live it. Love it. learn it.

Re: Two Motors Under One Motor Controller
 

One solution would be to use a "Y" pwm cable. In programming you would only create one motor controller, but the rio would send out the signal to two controllers via this split "Y" Cable.

If you are using the CAN Bus you can create a "Lead" and a "Follower" controller to match outputs.

Both of these methods can be useful if you are driving two motors into the same gearbox.

Re: Two Motors Under One Motor Controller
 

So you couldn't put like 2 bag motors on 1 talon sr?

Re: Two Motors Under One Motor Controller
 

According to rule R42 and Table 4-4, no.

Re: Two Motors Under One Motor Controller
 

The only motors you can put 2 of on one controller are:

Window/Door/Windshield Wiper/Door Motors
AndyMark PG
Bosch Motor
Snow-Blower Motor
Denso Throttle Control

This is outlined in R42 table 4.4