Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)
-   -   Filling pneumatic system in queue? (http://www.chiefdelphi.com/forums/showthread.php?t=134187)

jojoguy10 08-02-2015 09:01

Filling pneumatic system in queue?
 
Hi all!

We're trying to find a rule that says anything about starting up the robot and running the compressor to fill up our pneumatic air tanks. We are using an on-board compressor.

Thanks!

JohnM 08-02-2015 09:37

That is completely okay. My team did all last year too, and I think we plan on doing it this year too.

Daniel_LaFleur 08-02-2015 09:40

Re: Filling pneumatic system in queue?
 
Quote:

Originally Posted by JohnM (Post 1440193)
That is completely okay. My team did all last year.

This years rules =/= last years rules.

That said, it is legal to pre-charge your tanks before going on to the field.

rich2202 08-02-2015 10:35

Re: Filling pneumatic system in queue?
 
Most teams use an extra battery in the que to pre-charge.

mackenzieg 08-02-2015 12:08

Re: Filling pneumatic system in queue?
 
My team did this last year. I'd suggest bringing a battery with you in queue to fill the tanks, then switch to a new battery right before the match starts.

____________________
Mackenzie Glaser
Team 1261

IndySam 08-02-2015 12:31

Re: Filling pneumatic system in queue?
 
When we get back to the pits we do whatever repairs and updates we need to do with the last match battery still in the bot. Before we go out to queue we charge the pneumatics with that battery and then install a new one.

If your system is leaking enough to require a recharge while in line after precharging in the pits you need to work on the pneumatic systems to eliminate leaks.

As a caveat, we have been know when running late to perform the fill and battery change in the queuing line instead of in the pits.

cgmv123 08-02-2015 20:47

Re: Filling pneumatic system in queue?
 
Quote:

Originally Posted by rich2202 (Post 1440212)
Most teams use an extra battery in the que to pre-charge.

Quote:

Originally Posted by mackenzieg (Post 1440233)
I'd suggest bringing a battery with you in queue to fill the tanks, then switch to a new battery right before the match starts.

Note that you still have to use the control system to fill the tanks; you can't just connect a separate battery directly to the compressor.

Ether 08-02-2015 21:01

Re: Filling pneumatic system in queue?
 
Quote:

Originally Posted by Daniel_LaFleur (Post 1440194)
=/=

Here ya go: :-)



rich2202 08-02-2015 21:08

Re: Filling pneumatic system in queue?
 
"<>" also works.

Ether 08-02-2015 21:14

Re: Filling pneumatic system in queue?
 
Quote:

Originally Posted by rich2202 (Post 1440429)
"<>" also works.

!=



GeeTwo 08-02-2015 22:08

Re: Filling pneumatic system in queue?
 
Quote:

Originally Posted by Daniel_LaFleur (Post 1440194)
=/=

Or from some other infix languages I've used over the years:

~= (MATLAB)
.ne. (FORTRAN)
-ne (Bourne Shell)
/= (Ada)

Christopher149 08-02-2015 22:26

Re: Filling pneumatic system in queue?
 
Quote:

Originally Posted by GeeTwo (Post 1440453)
Or from some other infix languages I've used over the years:

~= (MATLAB)
.ne. (FORTRAN)
-ne (Bourne Shell)
/= (Ada)

And JavaScript has !== in addition to !=.

Sohaib 08-02-2015 23:16

Re: Filling pneumatic system in queue?
 
This is legal provided you don't break any other rules in the process. I imagine this year during the time you assemble your robot, you could charge your tanks. (Provided it is safe to do so.)

EricH 08-02-2015 23:21

Re: Filling pneumatic system in queue?
 
Quote:

Originally Posted by Sohaib (Post 1440481)
This is legal provided you don't break any other rules in the process. I imagine this year during the time you assemble your robot, you could charge your tanks. (Provided it is safe to do so.)

Nuh-uh. You're on the field, putting your robot together, it's either off or disabled. The compressor only runs when the robot is enabled. And tethering up is illegal.

Now if you're changing from one Transport Configuration to another within the same volume, sure, knock yourself out, because you're in queue for that. (Just don't leave Transport Configuration to do that.)

orangemoore 08-02-2015 23:24

Re: Filling pneumatic system in queue?
 
Quote:

Originally Posted by Sohaib (Post 1440481)
This is legal provided you don't break any other rules in the process. I imagine this year during the time you assemble your robot, you could charge your tanks. (Provided it is safe to do so.)

But it won't be.

As pointed out by FIRST through some rule changes about re-enabling after a match noted that to do so could be dangerous for the volunteers getting the field ready for the next match. Even if you are just charging your pneumatics things could happen where your robot moves or does something unexpected that a volunteer isn't looking out for.


All times are GMT -5. The time now is 05:55.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi