Chief Delphi - Wiring Question

Page 3 of 3

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Wiring Question (http://www.chiefdelphi.com/forums/showthread.php?t=134229)

Ether

15-02-2015 17:39

Re: Encoder Wiring

Use 2 DIO channels on the RIO. encoderA goes to signal on one DIO, encoderB goes to signal on the other DIO. encoder ground and power go to ground and power on one of the 2 DIOs.

GeeTwo

15-02-2015 22:58

Re: Wiring Question

Quote:

Originally Posted by JacobD (Post 1444500)

You could use those pwm splitters that came in the KOP this year. I believe they are brown, yellow, and red wires.

Getting the two PWM signals to match is probably the least likely cause of the problem, (more likely mechanical mismatches or uncalibrated controllers), though I do recall seeing at least one case this year.

All times are GMT -5. The time now is 06:35.

Page 3 of 3

Show 100 post(s) from this thread on one page