Chief Delphi - Certification test

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Certification test (http://www.chiefdelphi.com/forums/showthread.php?t=134351)

rich2202

11-02-2015 12:20

Certification test

I just passed the Robot Inspector certification test. It gives you your score, but doesn't tell you which questions you got wrong. I can see not telling you if you didn't pass (makes you brush up on all the rules). But, if you passed, I'd like to know what I didn't know.

jvriezen

11-02-2015 14:18

Re: Certification test

Quote:

Originally Posted by rich2202 (Post 1441813)

Hmm.. I haven't received an email about the test yet... Inspecting on week 1.

ehochstein

11-02-2015 14:19

Re: Certification test

Quote:

Originally Posted by jvriezen (Post 1441918)

Hmm.. I haven't received an email about the test yet... Inspecting on week 1.

Log into VIMS... There is a certifications button in the lower left corner.

rich2202

11-02-2015 15:40

Re: Certification test

If you have been assigned, then you can access the test through VIMS. I didn't receive a notice. I just volunteered, and was assigned. The Volunteer Coordinator told me the test was available.

EricH

11-02-2015 19:45

Re: Certification test

Quote:

Originally Posted by rich2202 (Post 1441974)

If you have been assigned, then you can access the test through VIMS. I didn't receive a notice. I just volunteered, and was assigned. The Volunteer Coordinator told me the test was available.

I didn't get an email either. But I took and passed it.

Same here on wanting to know what I didn't know.

Jon K.

12-02-2015 00:38

Re: Certification test

I could have sworn FIRST used to send an email out about the certifications, but I'm glad I read this thread. I have to get my Referee Cert done before week 1 as well!

All times are GMT -5. The time now is 21:05.