Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Pneumatics (http://www.chiefdelphi.com/forums/forumdisplay.php?f=54)
-   -   PCM slow red flash (http://www.chiefdelphi.com/forums/showthread.php?t=134379)

nxtmonkeys 11-02-2015 18:00

PCM slow red flash
 
The PCM is slowly flashing red. The CAN is wired properly, there are no compressor or solenoid faults (still flashes red when there's no solenoid or compressor) and the power is from a fresh battery. How can it be fixed?

ozrien 11-02-2015 18:05

Re: PCM slow red flash
 
You mean the STATUS LED is slowly blinking red? And the COMP LED is off I assume?

Robot is disabled or enabled when the STATUS LED is blinking red?

Does the PCM show up in the roboRIO Web-based config? If not check the CAN wiring. How did you confirm the CAN wiring?

Do you mean it does show up in the roboRIO web-based config and your confirmed it's not faulting by pressing Self-Test?

nxtmonkeys 11-02-2015 18:14

Re: PCM slow red flash
 
Quote:

Originally Posted by ozrien (Post 1442076)
You mean the STATUS LED is slowly blinking red? And the COMP LED is off I assume?

Yes, it's the status light.

Quote:

Robot is disabled or enabled when the STATUS LED is blinking red?
It flashes red for both.

Quote:

Does the PCM show up in the roboRIO Web-based config? If not check the CAN wiring. How did you confirm the CAN wiring?
No, it doesn't show up there. I have the CAN wired from the roboRIO to the PCM to the PDP. And the PDP works, so, as far as I can tell, the CAN is working.

ozrien 11-02-2015 18:29

Re: PCM slow red flash
 
Does the PDP show up in the roboRIO Web-based configuration page? What is the blink pattern on the PDP (both LEDs should blink the same)?

nxtmonkeys 11-02-2015 18:34

Re: PCM slow red flash
 
Yes the PDP shows up on the web-based configuration page, and both LEDs blink green.

ozrien 11-02-2015 19:08

Re: PCM slow red flash
 
Maybe take a pic of the wiring and send it to support@crosstheroadelectronics

Did the PCM ever blink green or orange before?

nxtmonkeys 12-02-2015 16:35

Re: PCM slow red flash
 
Quote:

Originally Posted by ozrien (Post 1442109)
Did the PCM ever blink green or orange before?

Yes.

We just got another PCM for our practice bot, and we tested that one, and it worked.


All times are GMT -5. The time now is 05:46.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi