Chief Delphi - Fabricated Items same as COTS

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Fabricated Items same as COTS (http://www.chiefdelphi.com/forums/showthread.php?t=134446)

rich2202

13-02-2015 15:02

Re: Fabricated Items same as COTS

Quote:

Originally Posted by Scott Kozutsky (Post 1443424)

The real trick is to mass produce your robot so you don't have to bag it.:D :rolleyes:

And have it cost $400 or less.

FrankJ

13-02-2015 15:06

Re: Fabricated Items same as COTS

Quote:

Originally Posted by rich2202 (Post 1443391)

I wish they gave an exception to Fabricated Items to allow long lengths to be cut down to more manageable lengths.

I don't think any reasonable inspector would quibble on stock cut to manageable lengths for transport. Some of the stock we get comes in 25' sticks. It gets cut in half immediately for storage. I don't think of it as fabricated parts. As long as it was not cut to size for a part.

All times are GMT -5. The time now is 07:54.

Page 2 of 2

Show 100 post(s) from this thread on one page