Chief Delphi - Maximum Input Frequency

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=177)

- - Maximum Input Frequency (http://www.chiefdelphi.com/forums/showthread.php?t=134517)

bharrison6

13-02-2015 16:09

Maximum Input Frequency

I am looking to get a new quadrature encoder to work for our shafts which spin around 5k rpm or so. I need to know the ppr to order. In order to do that I need to know the maximum input frequency of the robo rio.

Thanks in advance,
Bryant

bharrison6

13-02-2015 16:17

Re: Maximum Input Frequency

actually I need it of the tallon srx because that is want is decoding the signal

ozrien

13-02-2015 17:36

Re: Maximum Input Frequency

Checkout the electrical specs in Talon SRX User's Guide. Based on your RPM, you should be able to calc the max CPR (not PPR).

I think you'll find though that there is no practical limitation on what encoder you can choose.

Ether

13-02-2015 17:37

Re: Maximum Input Frequency

Quote:

Originally Posted by bharrison6 (Post 1443498)

actually I need it of the tallon srx because that is want is decoding the signal

The SRX decodes the quadrature encoders in hardware.

Max RPM is 80million/CPR (CPR=Cycles Per Rev).

All times are GMT -5. The time now is 20:16.