Wago's and such
 

http://i.imgur.com/LstAUoV.jpg?1This may be a stupid question but i cant seem to find a place where i can buy these specifically, i did however look at the wago website and there are a lot of different screw drivers. I think that one of those is a updated version of this one but i dont know which one is pretty much the same, if someone could please help that would be awesome because we really need like 2 more of these. Thanks.(btw this is my first time posting on chief Delphi so go easy on me)

Re: Wago's and such
 

You don't need an actual WAGO tool... Just take it to your local hardware store and get a couple of screw drivers that are about the same size.

Re: Wago's and such
 

The blade width is the important part. Buy one that is slightly longer and bend it to have an offset in it.

Nice for getting into tight places.

An angled one is also good.

Real picture here:

http://www.newark.com/wago/210-658/o...ort/dp/79K2417

Since they are cheap at your local cheap tool place it won't hurt to make a few of them....

..... mostly since they seem to sprout little feet and walk off.

Re: Wago's and such
 

i got the problem solved.

Re: Wago's and such
 

http://www.newark.com/wago/777-310/u...EN-PDP-29K5114

http://www.newark.com/wago/210-722/t...ool/dp/51R0264

Plenty more at that 2nd. link.

Re: Wago's and such
 

i solved the problem