moving parts of robot during robotinit
 

is it against the rules for the robot to move some parts during the robotinit() method (in java)?
in our case, we need to reset the encoder on the arms of the robot to a known position when the robot first starts up. this entails moving the arms to a limit switch and resetting the encoder.

thanks,

Re: moving parts of robot during robotinit
 

It is not possible to move motors (without altering the current pathways to have some sort of manual override) when the robot is Disabled (not in Teleoperated or Autonomous mode).

I don't have a specific rule, but the definition of Disabled in the rule book makes this illegal:

Re: moving parts of robot during robotinit
 

Agreed. Place the part as close to the desired location manually during setup, then make this calibration the first thing in autonomous.

Even better, unless it violates transport configuration or other practical issues, move the part to the proper location just before shutting down.