Chief Delphi - PDP giving faulty current readings

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=177)

- - PDP giving faulty current readings (http://www.chiefdelphi.com/forums/showthread.php?t=135343)

Spoam

02-03-2015 02:26

PDP giving faulty current readings

Let me start off by saying our PDP is running the latest firmware revision (1.4).

This is an image of a self-test showing all ports reporting 50+ amps under 0 load.

https://fbcdn-sphotos-h-a.akamaihd.n...7ba0680656ad46

It would be extremely useful for us to accurately read current, so if anyone can tell us how to fix this it would be greatly appreciated.

RufflesRidge

02-03-2015 06:48

Re: PDP giving faulty current readings

I would say you probably fix it by contacting support@crosstheroadelectronics.com for a replacement. The current sensors in your board are likely shot.

All times are GMT -5. The time now is 07:39.