We need help finding this piece
 

Would anyone know where we can obtain more bars/channels like this? Has it been discontinued?

Re: We need help finding this piece
 

Pretty sure that's just a standard piece of extruded U-channel, not something made specifically for FIRST. Dimensions would help us help you find it.

Re: We need help finding this piece
 

As an example, check for 9001K54 on McMaster. It's 2"x1" 6063 because I'm not sure what your exact application or size is. I would encourage you to check your local metal distributor since they would have the best prices.

Re: We need help finding this piece
 

If it's easier to source, you could get some tube and cut one side off, if you need it to be open on one side.

Dimensions would be helpful.

Re: We need help finding this piece
 

The dimensions for the piece we have are 1/2 in. wide and 1 in. tall. The metal itself is 1/16 in. thick. Or if necessary, in centimeters, it was roughly 1.2 cm wide, 2.5 cm tall, and .1 cm thick.
I'll look for it on McMaster, thanks. For clarification, the leg length is what I described as the "tallness", right?

Re: We need help finding this piece
 

Re: We need help finding this piece
 

Oh, thanks for providing the link.