Team Fusion 364 Improvements
 

Now that our season is over (lost Finals 2 at the Bayou Regional by 2 points), we decided to make some additions to our robot for Off-Season events. Currently, we don't have a way of keeping an RC secure on top of a stack, but that will be added soon. Here is a video of our new lift mechanism - the traditional "side" grabber. We can make a stack of 5 in 30 seconds.

https://www.youtube.com/watch?v=LmPk...ature=youtu.be

Re: Team Fusion 364 Improvements
 

I am so using the upside down tote idea to feed totes from the HP. We're currently exclusively landfill thanks to the tote faceplant feeding problem.

Re: Team Fusion 364 Improvements
 

Does that tote by the feeder station have to be upside down? If a tote is fed upside down through the chute, does it land such that you can align it against the wall to start making stacks?

Re: Team Fusion 364 Improvements
 

I am not sure if a tote can be fed through the human player station up-side down. I am also not sure if it will land in the correct orientation. We are just using an up-side down tote as a temporary replacement for a tethered ramp of some sort. If you can feed it through up-side down and position it correctly, that would eliminate the need to create a tethered ramp.

Re: Team Fusion 364 Improvements
 

The hole for the tote is tapered so that the tote will not pass through inverted.

Correction - the plate at the bottom of the chute has tabs that are too close together for an inverted tote to fit in the space -- see page 22 of the Field Drawings. These tabs are 15.25" apart,and the top of a tote is (per game rules 2.3.1), 16.9" wide.

Re: Team Fusion 364 Improvements
 

No it's not.

Re: Team Fusion 364 Improvements
 

The chute is designed so totes cannot be fed through the chute upside down.

However, a right side up tote works almost as well as a ramp as an upside down one. The yellow totes can be useful for this.