Drill Motors!
 

Posted by Anne Bergeron at 04/09/2001 3:25 PM EST


Coach on team #608, Prowling Panthers, from Georgia Institute of Technology and Georgia Tech/NASA/UTC/Ford/Ike Murray.



Is there a team out there that has an extra drill motor that they would be willing to send to Atlanta? We blew ours during the Nats. We were able to borrow one during the competition but had to give it back. We have lots of presentations that are scheduled and coming up real soon so we need to get our hands on one. Thanks in advance.

Re: Drill Motors!
 

Posted by Paul Copioli at 04/09/2001 4:53 PM EST


Engineer on team #217, Team Macomb - Royal Fusion, from Utica Schools, Fraser Schools, Warren Cons. School and Ford Motor Company.


In Reply to: Drill Motors!
Posted by Anne Bergeron on 04/09/2001 3:25 PM EST:



Anne,


We have plenty. Do you just need the motor? If you need the transmission too, let me know.

-Paul Copioli

I need your shipping address!!!

Re: Drill Motors!
 

Posted by ChrisH at 04/09/2001 6:14 PM EST


Engineer on team #330, Beach 'Bots, from Hope Chapel Academy and NASA JPL, J & F Machine, Raytheon, et al.


In Reply to: Drill Motors!
Posted by Anne Bergeron on 04/09/2001 3:25 PM EST:



: Is there a team out there that has an extra drill motor that they would be willing to send to Atlanta? We blew ours during the Nats. We were able to borrow one during the competition but had to give it back. We have lots of presentations that are scheduled and coming up real soon so we need to get our hands on one. Thanks in advance.

You can obtain them from your local Bosch distributor.

By the way what was the failure mode? Did you break gears or transmission? or did you overheat the motor itself? I'm playing around with a new transmission idea and don't have a good way to evaluate the new design on the detail level, like gear tooth size. However looking at failures can give me a good idea of whether or not I'm on the right track.

Chris Husmann
Team 330 the Beach'Bots