![]() |
pic: FIRST Team 1987 Conveyor Output
|
Re: pic: FIRST Team 1987 Conveyor Output
Quote:
|
Re: pic: FIRST Team 1987 Conveyor Output
It's a shame that by itself it's only worth 24 points.
|
Re: pic: FIRST Team 1987 Conveyor Output
Actually that would be 48 points.
Was there no one on your alliance that could put some containers up? Can you stack 4 then 2 and let a partner put a container on the 2 then they hoist it to the top of the 4 (for those robots that can't top a 6 stack)? |
Re: pic: FIRST Team 1987 Conveyor Output
Quote:
|
Re: pic: FIRST Team 1987 Conveyor Output
We built the robot knowing our max individual total was 60 points. With the right RC topper robot it becomes much more valuable. At buckeye, as you can see in the videos on this thread, 4269 was able to top 4 stacks.
|
Re: pic: FIRST Team 1987 Conveyor Output
4269's ability to grab containers, noodle them, and cap them on 1987's 4-stacks (along with smart assistance from 2399) almost led them to a Buckeye finals berth. In the end, they lost to the 5413/48/291 alliance by a single average point in the semifinals, which is essentially 2 more scored totes.
It took them just a bit too long in the semis to get really good at what they were doing, but at least they went out guns-a-blazin', as evidenced by this performance in Semifinals Match 6: https://www.youtube.com/watch?v=_246QNFW2Kk |
Re: pic: FIRST Team 1987 Conveyor Output
Nice job! Man, if you could get paired with a team that could cap stacks of 6, you'd be set. It's pretty hard, though. My team can cap stacks of 5, but 6 is tough.
|
Re: pic: FIRST Team 1987 Conveyor Output
Do you have to start on the near platform? I can see some problems if your capper can't see and doesn't have a camera.
It's a really impressive problem to be dealing with. |
Re: pic: FIRST Team 1987 Conveyor Output
Travis - It was priceless watching your teams reaction when you got your ticket to champs. Congratulations
We are\were hoping there are some six stack toppers out there, but they are probably not plentiful due to the engineering challenge of said task. We suspect there are many more 5 stack toppers available. We do have a camera watching the far the side of the field (toward the step). We don't use our driver station display for our drivers so it can be faced to alliance partners if necessary. I don't think we used the camera in that fashion yet. That being said, 4269's drivers were amazing. As far as we know the only thing they could see was the top of the RCs as they were placing them. Apparently it works. |
Re: pic: FIRST Team 1987 Conveyor Output
If anyone is interested you can check out our fully autonomous code check out this link https://github.com/FRCTeam1987/Robot2015
|
Re: pic: FIRST Team 1987 Conveyor Output
This is a thing of beauty. I so wish our robots could play together...
|
Re: pic: FIRST Team 1987 Conveyor Output
I'm confused why you didn't have the "capping" team cap your stack of 4 while it was still in your robot, then finish it off to be a 6 stack.
I love your design nonetheless. I wish that it had been a more viable strategy to use as well. |
Re: pic: FIRST Team 1987 Conveyor Output
Awesome work 1987! I just showed the video linked by Travis to one of the other engineers here at work and he was extremely impressed.
Quote:
|
Re: pic: FIRST Team 1987 Conveyor Output
Quote:
|
| All times are GMT -5. The time now is 16:19. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi