Chief Delphi - Roborio bricked?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=177)

- - Roborio bricked? (http://www.chiefdelphi.com/forums/showthread.php?t=136268)

jagow100

31-03-2015 16:18

Roborio bricked?

So one of our RoboRio's seems to have been bricked. Luckily it is on our practice but it is still urgent. The status light is blinking orange. Unfortunately even after following the screensteps on the issue, we haven't been able to connect to the roborio any way. We also tried calling NI but they just redirected us to the forums We can't re-image it and we can't connect to the dashboard, either by USB or ethernet. We're kind of stuck here and any input would be appreciated.

cgmv123

31-03-2015 16:23

Re: Roborio bricked?

Call the specific NI RoboRIO support number at 866-511-6285.

ATannahill

01-04-2015 08:40

Re: Roborio bricked?

Have you tried using the roboRIO imaging tool to find it while connected by USB?

I have seen a similar instance where you could not get to the webdashboard with roboRIO-team.local but the 172.22.11.2 would work. It doesn't particularly matter if you can find it via the imaging tool.

simpsonboy77

08-04-2015 00:59

Re: Roborio bricked?

Power up the rio, and hold the reset button for 5 seconds. This should put it in safe mode. Then try imaging via USB as Alex described above.

All times are GMT -5. The time now is 10:12.