Chief Delphi - FIRST Chesapeake Districts

Page 6 of 15

Last »

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - FIRST Chesapeake Districts (http://www.chiefdelphi.com/forums/showthread.php?t=137571)

Hallry

10-07-2015 09:25

Re: FIRST Chesapeake Districts

Quote:

Originally Posted by notmattlythgoe (Post 1489541)

(/snip) Credit for the logos goes to Nate Laverdure

I like 'em; they're much cleaner than the logo shown in the information presentation:

.

I would certainly hope that the Steering Committee would be open to possible logo alternatives.

notmattlythgoe

10-07-2015 09:27

Re: FIRST Chesapeake Districts

Quote:

Originally Posted by Hallry (Post 1489543)

I like 'em; they're much cleaner than the logo shown in the information presentation:

.

I would certainly hope that the Steering Committee would be open to possible logo alternatives.

And that's even ignoring the fact that the one from the presentation is actually in violation of the FIRST Brand Standards.

wilsonmw04

10-07-2015 09:55

Re: FIRST Chesapeake Districts

Quote:

Originally Posted by notmattlythgoe (Post 1489544)

And that's even ignoring the fact that the one from the presentation is actually in violation of the FIRST Brand Standards.

noticed that as well. Sent an email about it a few days ago.

Christopher149

10-07-2015 10:24

Re: FIRST Chesapeake Districts

Quote:

Originally Posted by notmattlythgoe (Post 1489544)

And that's even ignoring the fact that the one from the presentation is actually in violation of the FIRST Brand Standards.

Though, it's not much different from the FIM logo.

Hallry

10-07-2015 10:42

Re: FIRST Chesapeake Districts

Quote:

Originally Posted by notmattlythgoe (Post 1489544)

And that's even ignoring the fact that the one from the presentation is actually in violation of the FIRST Brand Standards.

Quote:

Originally Posted by Christopher149 (Post 1489547)

Though, it's not much different from the FIM logo.

Actually, it looks like the PNW logo also goes against the FIRST Branding and Design Standards by putting the FIRST logo on top of graphic shapes, and the Indiana logo may also violate them by altering the triangle in the logo. Additionally, it looks like the New England logo might be in violation for improper alignment of the name "FIRST" and the FIRST logo.

The only district logo that does not seem to go against the Branding and Design Standards is the MAR logo, which does not use the name "FIRST" or the FIRST logo anywhere at all.

notmattlythgoe

10-07-2015 10:50

Re: FIRST Chesapeake Districts

Quote:

Originally Posted by Hallry (Post 1489549)

Actually, it looks like the PNW logo also goes against the FIRST Branding and Design Standards by putting the FIRST logo on top of graphic shapes, and the Indiana logo may also violate them by altering the triangle in the logo. Additionally, it looks like the New England logo might be in violation for improper alignment of the name "FIRST" and the FIRST logo.

The only district logo that does not seem to go against the Branding and Design Standards is the MAR logo, which use the name "FIRST" or the FIRST logo anywhere at all.

The PNW logo doesn't violate it because there are far fewer restrictions on the wordmark part of the logo as there are of the icon.

Indiana might also get away with it because by changing the triangle it is actually no longer the FIRST logo.

However, anything that uses one or the other is technically a violation too.

Qbot2640

10-07-2015 10:59

Re: FIRST Chesapeake Districts

Should have called it "FIRST District in Chesapeake", then you could all put:

"Member FDIC" after your team number.

notmattlythgoe

10-07-2015 11:00

Re: FIRST Chesapeake Districts

Quote:

Originally Posted by Qbot2640 (Post 1489553)

Should have called it "FIRST District in Chesapeake", then you could all put:

"Member FDIC" after your team number.

Gold. Hire this guy to choose names from now on.

TDav540

10-07-2015 11:33

Re: FIRST Chesapeake Districts

Quote:

Originally Posted by Qbot2640 (Post 1489553)

Should have called it "FIRST District in Chesapeake", then you could all put:

"Member FDIC" after your team number.

Stan where are you! We need this name!

Kevin Leonard

10-07-2015 11:48

Re: FIRST Chesapeake Districts

Quote:

Originally Posted by TDav540 (Post 1489557)

Stan where are you! We need this name!

Personally, I liked "FIRST on the Chesapeake", but thats just me. :P

notmattlythgoe

10-07-2015 11:50

Re: FIRST Chesapeake Districts

Quote:

Originally Posted by Kevin Leonard (Post 1489559)

Personally, I liked "FIRST on the Chesapeake", but thats just me. :P

Right? FIRST Chesapeake sounds like a company name and not a description of a region. I get what they were going for, I just think they missed the mark a bit.

wilsonmw04

10-07-2015 12:52

Re: FIRST Chesapeake Districts

My favorite was FIRST DMV ;)

ParkerMak

10-07-2015 13:02

Re: FIRST Chesapeake Districts

I still think FAMED (FIRST Atlantic Mid-East District) was the way to go.

AGPapa

10-07-2015 13:20

Re: FIRST Chesapeake Districts

We have FIM, MAR, NE, PNW and IN as our current districts with GA, NC and "FIRST Chesapeake" coming next year. Kind of a mouthful, what acronym are we going to use for the Chesapeake district area?

Nate Laverdure

10-07-2015 13:21

Re: FIRST Chesapeake Districts

Washington FIRST Robotics isn't really using its name anymore, right? We could use that.

Quote:

Originally Posted by AGPapa (Post 1489578)

We have FIM, MAR, NE, PNW and IN as our current districts with GA, NC and "FIRST Chesapeake" coming next year. Kind of a mouthful, what acronym are we going to use for the Chesapeake district area?

The abbreviation for FIRST Chesapeake is 'CHE'.

All times are GMT -5. The time now is 06:53.

Page 6 of 15

Last »

Show 100 post(s) from this thread on one page