Chief Delphi - pic: Why we do this

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: Why we do this (http://www.chiefdelphi.com/forums/showthread.php?t=137734)

pic: Why we do this

Re: pic: Why we do this

Good post. Too often forgotten.

Re: pic: Why we do this

Yes, Yes, Yes, and, um, yes. A smiling teen is almost always an inspired teen.

Re: pic: Why we do this

Nice pic.

However, please put some protection around those gears before powering this unit up ! Highly exposed pinch points !

Re: pic: Why we do this

Quote:

Originally Posted by jvriezen (Post 1490149)

Nice pic.

However, please put some protection around those gears before powering this unit up ! Highly exposed pinch points !

You're right, and thanks for the reminder.

The small clearance between wheels and mini-CIMs worries me more than the motor pinions meshing with 72T gears. Anyway, this chassis is designed to fit inside an interesting sheet metal cabinet, which will limit access to pinch points. Our wiring and programming folks will have to be careful while working around the chassis before the cabinet goes on. They have some experience with that, because we used the same drivetrain components (with Colsons rather than mecanums) on our 2015 competition 'bot.