Chief Delphi - Configuring Radio D-Link DAP-1522 to linksys WRT610N

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=177)

- - Configuring Radio D-Link DAP-1522 to linksys WRT610N (http://www.chiefdelphi.com/forums/showthread.php?t=137994)

vinharish7

18-08-2015 18:38

Configuring Radio D-Link DAP-1522 to linksys WRT610N

Hi I am a rookie on the team and was wondering how to connect the computer to the radio... Thank you very much for any help :D
P.S. the router and radio info are stated in the title....

cgmv123

18-08-2015 22:59

Re: Configuring Radio D-Link DAP-1522 to linksys WRT610N

Configure the Linksys as an access point first. (The wireless tab of the configuration page) Secured vs. unsecured doesn't really matter, but make sure SSID broadcast is enabled. Then make sure the D-link is in bridge mode (the switch next to the power input) and configure it to connect to the Linksys. The D-link web interface can do a scan for available access points. Select the one you configured the Linksys to and you should be all set.

All times are GMT -5. The time now is 07:38.