Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Best Looking Gearbox (http://www.chiefdelphi.com/forums/showthread.php?t=138137)

Jonathan Cheng 10-09-2015 15:46

Best Looking Gearbox
 
What are the best gearbox designs,aesthetics, etc. you've seen over the years?

Ginger Power 10-09-2015 15:52

Re: Best Looking Gearbox
 
I like the gearboxes that can move my mechanical systems reliably.

Rachel Lim 10-09-2015 15:57

Re: Best Looking Gearbox
 
Definitely not something to use, but I always liked this one:


carpedav000 10-09-2015 16:21

Re: Best Looking Gearbox
 
Without hesitation:

http://www.chiefdelphi.com/media/photos/39544

EricH 10-09-2015 20:10

Re: Best Looking Gearbox
 
Quote:

Originally Posted by carpedav000 (Post 1495652)

I'll see you, and raise you:

http://www.chiefdelphi.com/media/photos/27018

asid61 10-09-2015 20:55

Re: Best Looking Gearbox
 
Quote:

Originally Posted by carpedav000 (Post 1495652)

Seconded. 254 and 968 are nice, but the extra CIM and flipped-motor design, plus the snazzy covers are just too much.

thatprogrammer 10-09-2015 21:00

Re: Best Looking Gearbox
 
Quote:

Originally Posted by asid61 (Post 1495674)
Seconded. 254 and 968 are nice, but the extra CIM and flipped-motor design, plus the snazzy covers are just too much.

Plus the belts look so fine...

jman4747 10-09-2015 22:29

Re: Best Looking Gearbox
 
Oh but I hope you all didn't forget: http://www.chiefdelphi.com/forums/sh...ad.php?t=89768

The king.

Mitchell1714 10-09-2015 23:08

Re: Best Looking Gearbox
 
Quote:

Originally Posted by jman4747 (Post 1495684)
Oh but I hope you all didn't forget: http://www.chiefdelphi.com/forums/sh...ad.php?t=89768

The king.

This is actually a complete lack of gearbox...

But its funny to read through again.

Knufire 10-09-2015 23:43

Re: Best Looking Gearbox
 
I'm going to throw in 1717's swerve modules to the mix.

http://wiki.team1640.com/index.php?t...awesome_pivots

waialua359 11-09-2015 03:25

Re: Best Looking Gearbox
 
Are we asking about California's best looking gearboxes, or is this just a coincidence?😊

Tom Ore 11-09-2015 05:56

Re: Best Looking Gearbox
 
I kinda like this one. We never built it though...

Knufire 11-09-2015 11:17

Re: Best Looking Gearbox
 
Quote:

Originally Posted by waialua359 (Post 1495706)
Are we asking about California's best looking gearboxes, or is this just a coincidence?��

When I went to Chezy Champs 2014. I was completely blown away by how nearly every single robot there was colored. It seems that California, on average, places a much higher value on aesthetics than other regions.

Ive often wondered how related this is to the type of engineering firms in the area. I've heard several California teams justify the time put into the aesthetics of their robot with sponsors wanting to see a complete, finished product. Back In Michigan, I rarely hear the same justification; sponsors there are just looking for different things.

Thad House 11-09-2015 12:44

Re: Best Looking Gearbox
 
Quote:

Originally Posted by Knufire (Post 1495721)
When I went to Chezy Champs 2014. I was completely blown away by how nearly every single robot there was colored. It seems that California, on average, places a much higher value on aesthetics than other regions.

Ive often wondered how related this is to the type of engineering firms in the area. I've heard several California teams justify the time put into the aesthetics of their robot with sponsors wanting to see a complete, finished product. Back In Michigan, I rarely hear the same justification; sponsors there are just looking for different things.

It definitely is interesting how you go to different areas of the country and get completely different robots. Get me a set of robots from Texas, California, Michigan, PNW and NE, and every one will have much different design values.

As for this actual thread, I always liked the look of the 254 flat gearboxes from 2013 and 2014. I keep suggesting to VexPro they should release those, because the form factor for those is really convenient.

MichaelBick 11-09-2015 12:59

Re: Best Looking Gearbox
 
Quote:

Originally Posted by Thad House (Post 1495727)
As for this actual thread, I always liked the look of the 254 flat gearboxes from 2013 and 2014. I keep suggesting to VexPro they should release those, because the form factor for those is really convenient.

254 has broken countless motors with those gearboxes.


All times are GMT -5. The time now is 03:03.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi