Favorite Tool by Team
 

Didn't see an old thread by this so here goes...

With the season approaching, I though it would be great if teams could share their handiest, favorite tool (please do not nominate a mentor ;) )to use throughout the competition. So I'll start.

A few years ago, our lead mentor showed up to a practice with these. Handiest wire strippers on the planet! No need to know gauge as it automatically adjusts. Also cuts wire to length. No corn dog maker function yet.

Here is how it strips (similar model shown)

Just thought I would pass this along for any team who has had trouble with their electronics and I would love to know your team's best kept secret in tooling! :)

Re: Favorite Tool by Team
 

https://www.phoenixcontact.com/onlin...il:pid=1212150

These Wire Strippers will never be beaten in my book...

Re: Favorite Tool by Team
 

A pneumatic tubing cutter will save you hours of chasing leaks and is a staple on FRC558.

Re: Favorite Tool by Team
 

Our most commonly needed tool is definitely the 5/32" allen wrench.

We talk a good bit about using the precision tuner for percussive maintenance. (the P.T. is the rubber mallet).

Controls was revolutionized in the 2014 season when we bought some real crimping tools, rather than using a multi-tool that's almost decent for automotive terminals for everything from Duponts to Anderson battery connectors.

I think we've used every attachment on my Swiss Army Knife (including the corkscrew) at one point or another.

Re: Favorite Tool by Team
 

Met a guy on electric snowmobile team in college, showed us this cool tool for crimping terminals on 6 AWG wire for batteries. Put the wire and terminal in the tool and then either used hammer or small arbor press to crimp, depending on which was available.



http://www.temcoindustrialpower.com/...rs/TH0007.html

Re: Favorite Tool by Team
 

This is my favorite 25 pitch chain tool:

http://www.davesmotors.com/s.nl/it.A/id.2258/.f

Re: Favorite Tool by Team
 

I second this. Crooked tubing cuts are a leading cause of pneumatics leaks on systems I've seen.


If you're not cutting small (>14AWG) wire and zip ties with Hakko flush cutters, you're missing out. Comfiest cutters I've ever used, stays sharp forever, and has the most flush cut I've ever seen. Great for cutting zip tie ends!

If you do any work with #25 chain, you need to get a Team 221 Dark Soul Chain tool. It's the easiest chain breaking/joining tool I've ever used.

I love this thread. I've been compiling a list of parts and tools for us to purchase in preparation for 2016, so this is definitely helpful.

Re: Favorite Tool by Team
 

Used to be the Rotex punch. But we haven't been in that shop for five years.

Re: Favorite Tool by Team
 

Zip tie gun made by Panduit!

We even have a sponsor who lives in San Diego that ships us tons of zip ties and guns every year.;)

Re: Favorite Tool by Team
 

So much that they even stole 195's last year! :P

Re: Favorite Tool by Team
 

Nate Laverdure :p

Re: Favorite Tool by Team
 

Personally, my favorite tool in our shop is our 5lb. rubber mallet. It is my favorite because when even someone(more than likely its me) is in a poor mood, we hand them the mallet. On one side it has "Hows your attitude?" written on it. Changes everyone's mood right away.

Re: Favorite Tool by Team
 

The mill. I use it as a drill press wit low runout occasionally, and of couse for machining all the time.
But apart from that, probably the socket ratchet set. It's super handy for taking care of locknuts in tight spaces or though a hole.

Re: Favorite Tool by Team
 

CNC Plasma cutter

Re: Favorite Tool by Team