Chief Delphi
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   MXP Ethernet Switch (http://www.chiefdelphi.com/forums/showthread.php?t=138472)

Alan Anderson 13-10-2015 11:43
Re: MXP Ethernet Switch
 
Depending on the 2016 power rules, it might be worthwhile to include support for either 802.3af-compliant Power Over Ethernet or the less expensive (and less officially standard) simple voltage POE accepted by the OM5P-AN.

Richard.Varone 13-10-2015 12:43
Re: MXP Ethernet Switch
 
Quote:
Originally Posted by Alan Anderson (Post 1499823)
Depending on the 2016 power rules, it might be worthwhile to include support for either 802.3af-compliant Power Over Ethernet or the less expensive (and less officially standard) simple voltage POE accepted by the OM5P-AN.
After looking for small/cheap POE powered switches, this is exactly where this project might head.

Edit: or maybe not because I found this http://www.amazon.com/BV-TECH-BV-RP1...powered+switch. The question I guess I have for myself now is would I be able to make something smaller/lighter, and I'd like to see if it would be possible to make sometime like this into a dongle that hangs securely off of the OM5P perhaps.


All times are GMT -5. The time now is 12:29.
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi