Chief Delphi
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Inverted 3 CIM 2 speed gearbox with PTO (http://www.chiefdelphi.com/forums/showthread.php?t=138860)

traxxasracr1 02-11-2015 20:53
Re: pic: Inverted 3 CIM 2 speed gearbox with PTO
 
Quote:
Originally Posted by D_Price (Post 1502765)
You said you guys are going to test for brownouts. Are you going toramp up the speed until you achieve the brownout or up to a speed conducive with an event type environmnent?
We might experiment with ramping up speeds when we get the drivetrain built, but until then, we are focusing on actually getting it built.

traxxasracr1 02-11-2015 20:55
Re: pic: Inverted 3 CIM 2 speed gearbox with PTO
 
Quote:
Originally Posted by carpedav000 (Post 1502842)
It looks like the third plate is for mounting and giving the cylinder for the PTO some wiggle room.
The cylinder isn't mounted on this plate, I didn't want to attatch anything to that plate in case we end up taking it out. that 3rd plate is just simply extra support to prevent sagging.

You can see it better in this picture http://www.chiefdelphi.com/media/photos/42422?

carpedav000 02-11-2015 21:23
Re: pic: Inverted 3 CIM 2 speed gearbox with PTO
 
Quote:
Originally Posted by traxxasracr1 (Post 1502872)
The cylinder isn't mounted on this plate, I didn't want to attatch anything to that plate in case we end up taking it out. that 3rd plate is just simply extra support to prevent sagging.

You can see it better in this picture http://www.chiefdelphi.com/media/photos/42422?
Sorry, should've worded that differently. I realize that the cylinder is mounted to the second plate. When I said mounting, I meant gearbox to chassis.

ThePayneTrain24 24-12-2016 13:39
Re: pic: Inverted 3 CIM 2 speed gearbox with PTO
 
Would it be at all possible for you to post the CAD for this gearbox? I myself am in the process of designing a custom gearbox with ball shifters for both a PTO and for shifting between two speeds, rather than using a dog tooth for the PTO as you seem to have done.

traxxasracr1 27-12-2016 12:34
Re: pic: Inverted 3 CIM 2 speed gearbox with PTO
 
Quote:
Originally Posted by ThePayneTrain24 (Post 1623340)
Would it be at all possible for you to post the CAD for this gearbox? I myself am in the process of designing a custom gearbox with ball shifters for both a PTO and for shifting between two speeds, rather than using a dog tooth for the PTO as you seem to have done.
Oh man, I never thought this thread would come back up. I'd love to post the CAD, the only problem is that it's so old I'm not sure if I have it anymore. I'll dig around and see if I can find it and post at some point

ThePayneTrain24 30-12-2016 17:33
Re: pic: Inverted 3 CIM 2 speed gearbox with PTO
 
Thank you in advance, traxxasracr1.


All times are GMT -5. The time now is 08:32.
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi