Chief Delphi
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: 3D printed FIRST logo (http://www.chiefdelphi.com/forums/showthread.php?t=138908)

Jalerre 04-11-2015 15:52
Re: pic: 3D printed FIRST logo
 
Quote:
Originally Posted by JustinCAD (Post 1503145)
What are the general dimensions of this print? Just wondering!

I can't tell due to the fact that there is nothing to relate measurements to in the picture, though it might just be my eyes.

Thanks!
When you pull the triangle and square apart its approximately 3" long. Each piece is about 1.5" tall and 1/8" thick.

Jalerre 04-11-2015 16:05
Re: pic: 3D printed FIRST logo
 
https://drive.google.com/file/d/0B70...ew?usp=sharing
https://drive.google.com/open?id=0B7...HB0ZHNQbDE5U1U
https://drive.google.com/open?id=0B7...1haWEpySlBvOUU

Here is some images of the pieces hanging and the CAD models.


All times are GMT -5. The time now is 09:15.
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi