Chief Delphi - HTD 5mm Tooth profile

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- CAD (http://www.chiefdelphi.com/forums/forumdisplay.php?f=168)

- - HTD 5mm Tooth profile (http://www.chiefdelphi.com/forums/showthread.php?t=140177)

cad321

10-12-2015 13:43

HTD 5mm Tooth profile

I am currently trying to cad a tooth profile for an HTD 5mm belt and am not having much success. My goal is to be able to take this profile and make a custom pulley on our CNC with a ballnose cutter. I have seen teams do this in the past so I know it's possible. Does anyone have a cad model or sketch of the belt profile? Or know where to find the dimensions so I can draw it myself?

Tim Sharp

10-12-2015 13:50

Re: HTD 5mm Tooth profile

Maybe this will help.

http://www.gates.com/catalogs-and-re...tions/partview

androb4

10-12-2015 14:03

Re: HTD 5mm Tooth profile

SDP/SI is a great source full pulling some geometry.

Last year I laser cut a couple of gears using geometry from one of their models.

Rachel Lim

10-12-2015 19:40

Re: HTD 5mm Tooth profile

This document should have the dimensions for 5mm HTD belts: http://www.sdp-si.com/D265/PDF/D265P1027.pdf

All times are GMT -5. The time now is 22:43.