Chief Delphi
Page 2 of 9 < 1 2 3456789 >
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   VEXpro 2016 (http://www.chiefdelphi.com/forums/showthread.php?t=140178)

Basel A 10-12-2015 15:28
Re: VEXpro 2016
 

Mike Marandola 10-12-2015 15:31
Re: VEXpro 2016
 




Quote:
Originally Posted by cbale2000 (Post 1511123)
I was starting to wonder if you guys had forgotten about this or if there really was an update, especially since the only official word about the update was just that one Twitter post. ;)
They didn't forget, JVN even leaked what they will be releasing.

Thad House 10-12-2015 15:31
Re: VEXpro 2016
 
OMG THANK YOU FOR THE NEW 775!!

Grant Cox 10-12-2015 15:32
Re: VEXpro 2016
 
And we're back! First post has been updated with some specific info, but check out the New for 2016 page for details.

Andrew Schreiber 10-12-2015 15:36
Re: VEXpro 2016
 
Re Motors.Vex.Com What's the sample size?

Nathan Streeter 10-12-2015 15:37
Re: VEXpro 2016
 
Quote:
Originally Posted by Grant Cox (Post 1511120)
That 775 motor though!!

Battery In: 12V DC
Free Speed: 18,700 rpm (+/- 10%)
Maximum Power: 347 W
Stall Torque: 6.28 in-lbs (0.71 N-m)
Stall Current: 134A
Size: 1.744” (44.3 mm) diameter, 2.602” (66.10 mm) long
Weight: 0.8 lbs (actual weight one item, no packaging)

I'm guessing that VEX has more-or-less 'pre-approved' this with FIRST HQ... There'd be some serious public outcry if that motor weren't allowed!

Aren_Hill 10-12-2015 15:38
Re: VEXpro 2016
 
Quote:
Originally Posted by Andrew Schreiber (Post 1511149)
Re Motors.Vex.Com What's the sample size?
Currently 8 motors were tested for that Data, will develop further over time.

-Aren

Andrew Schreiber 10-12-2015 15:40
Re: VEXpro 2016
 
Quote:
Originally Posted by Aren_Hill (Post 1511151)
Currently 8 motors were tested for that Data, will develop further over time.

-Aren
I might be asking a but is it possible to put that number (and maybe min/max) somewhere on the page?

I also assume all of this is stored in the raw data section but I haven't gotten there yet.

Thad House 10-12-2015 15:40
Re: VEXpro 2016
 
Quote:
Originally Posted by Nathan Streeter (Post 1511150)
That 775 motor though!!

Battery In: 12V DC
Free Speed: 18,700 rpm (+/- 10%)
Maximum Power: 347 W
Stall Torque: 6.28 in-lbs (0.71 N-m)
Stall Current: 134A
Size: 1.744” (44.3 mm) diameter, 2.602” (66.10 mm) long
Weight: 0.8 lbs (actual weight one item, no packaging)

I'm guessing that VEX has more-or-less 'pre-approved' this with FIRST HQ... There'd be some serious public outcry if that motor weren't allowed!
That 775 has an awesome power output. All my worries are gone. The new best FRC motor is back. More powerful then a CIM is plain amazing

jman4747 10-12-2015 15:44
Re: VEXpro 2016
 
Vex Pro 2016:

WHAT!?


YES!

mman1506 10-12-2015 15:49
Re: VEXpro 2016
 
They listened to me :D VP encoder!

AdamHeard 10-12-2015 15:50
Re: VEXpro 2016
 
Quote:
Originally Posted by Thad House (Post 1511153)
That 775 has an awesome power output. All my worries are gone. The new best FRC motor is back. More powerful then a CIM is plain amazing
This is appears to be a much higher quality motor than the one banebots sourced as well.

Jared Russell 10-12-2015 15:52
Re: VEXpro 2016
 
Quote:
Originally Posted by Thad House (Post 1511153)
That 775 has an awesome power output. All my worries are gone. The new best FRC motor is back. More powerful then a CIM is plain amazing
Commence the year of the brown out!

Thad House 10-12-2015 15:52
Re: VEXpro 2016
 
Quote:
Originally Posted by Aren_Hill (Post 1511151)
Currently 8 motors were tested for that Data, will develop further over time.

-Aren
Do you guys ever think you would be able to test the old 775, that way teams could easily compare it to the new 775pro?

Jared Russell 10-12-2015 15:53
Re: VEXpro 2016
 
Quote:
Originally Posted by Thad House (Post 1511159)
Do you guys ever think you would be able to test the old 775, that way teams could easily compare it to the new 775pro?
Look at the page again :)

http://motors.vex.com/


All times are GMT -5. The time now is 14:31.
Page 2 of 9 < 1 2 3456789 >
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi