![]() |
Basic Spark Linearity Testing
We just completed some basic testing on the Spark, both under load and with no output attached.
http://www.fightingpi.org/Resources/...ntroller.shtml We're very happy with how it's been acting on our robot so far. We'd like to do more... but #Christmas #Newyears #Reallife #Kickoff In a perfect world we would have tested with talons and new victors as well, but unfortunately this was done at home. Our build space is locked for the holidays =/. |
Re: Basic Spark Linearity Testing
Quote:
|
Re: Basic Spark Linearity Testing
Tom
Thanks for doing the tear-down and taking the measurements. Near the end of your write-up, you state "The motor controller did not experience any problems or overheat, and we drained 3 batteries that way." Did you happen to note what the heatsink temperature got to or did you do the old "if you can hold your finger on it, it should be Okay" test? |
Re: Basic Spark Linearity Testing
We did not take any formal temperature data, but the sparks never got so hot that we couldn't touch them without getting burned.
|
| All times are GMT -5. The time now is 03:00. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi