What is the default password for the open mesh?
 

What is the default password for the open mesh web gate?

Re: What is the default password for the open mesh?
 

is there an answer to this question? The default password of 0p3nm35h does not work.

Re: What is the default password for the open mesh?
 

This page tells you how to configure the radio for home use:

http://wpilib.screenstepslive.com/s/...o-for-home-use

Re: What is the default password for the open mesh?
 

I think ours is setup for root/root but I can't check until tomorrow.

Re: What is the default password for the open mesh?
 

Hi,

The default credentials for the Open Mesh device are:

UN: root
PW: (nothing)

That's right there is no password, just hit login and you are in!

The guide I followed shows you how to set the password and configure the device properly.

Source:
http://files.andymark.com/OM5P-AN_QuickAP_Setup.pdf

Re: What is the default password for the open mesh?
 

For us, with the FRC firmware after configuring it with the utility, both the username and password were admin (I think).

Edit: now I'm doubting myself - it might also be root for both

Re: What is the default password for the open mesh?
 

If you use the latest version of firmware from the TeamForge website the userID is root and the password is root. Just tested on my version and empty password was rejected.

-Hugh