Chief Delphi
Page 1 of 2 1 2 >
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)
-   -   JAVA RobotDrive Motors Signal Out of Sync (http://www.chiefdelphi.com/forums/showthread.php?t=141680)

FRCteam5837 13-01-2016 20:41
JAVA RobotDrive Motors Signal Out of Sync
 
During programming of our test stand in JAVA, we found that regardless of control channel for the move speed value, the motors start rotating at different points. This will cause a robot to turn at low speeds with no turning inputs.

This issue was confirmed with multiple channel changes of the motors, and the problem switching motors if the channel for motor signal is switched.

Is there an inherent problem in the RobotDrive or other library files that may be causing this problem?

We are using the arcadeDrive function to feed outputs to the robot.

Regardless of the changes made to the control scheme the problem persists. Resolution of this issue appears to require a PID controller to ensure constant direction without turning input. While this would be one way to solve a built in turn, this should not be required to make an aligned robot move straight forward.

Anyone with information on this issue would be much appreciated.

virtuald 13-01-2016 20:55
Re: JAVA RobotDrive Motors Signal Out of Sync
 
Post your code?

FRCteam5837 13-01-2016 21:57
Re: JAVA RobotDrive Motors Signal Out of Sync
 
Here is the current code we are using, for a controller we are using the Logitech X30 flight stick.
Code:


package org.usfirst.frc.team5837.robot;

import edu.wpi.first.wpilibj.CameraServer;
import edu.wpi.first.wpilibj.IterativeRobot;
import edu.wpi.first.wpilibj.Joystick;
import edu.wpi.first.wpilibj.RobotDrive;
import edu.wpi.first.wpilibj.Victor;


public class Robot extends IterativeRobot {
        Victor R_Motor = new Victor(1);
        Victor L_Motor = new Victor(0);
        RobotDrive chassis = new RobotDrive(R_Motor ,L_Motor);
       
        Joystick drive = new Joystick(0);
       
        int autoLoopCounter;
       
        double yAxis = drive.getY();
        double xAxis = drive.getX();
        double slider = drive.getRawAxis(3);
       
        double yMath;
        double xMath;
        double sliderMath;
       
    /**
    * This function is run when the robot is first started up and should be
    * used for any initialization code.
    */
    public void robotInit() {
            CameraServer server = CameraServer.getInstance();
            server.setQuality(50);
            server.startAutomaticCapture("cam0");       
               
    }
       
        /**
    * This function is called once each time the robot enters Disabled mode.
    * You can use it to reset any subsystem information you want to clear when
        * the robot is disabled.
    */
    public void disabledInit(){

    }
       
        public void disabledPeriodic() {
               
        }

       
    public void autonomousInit() {
            autoLoopCounter = 0;
    }

    /**
    * This function is called periodically during autonomous
    */
    public void autonomousPeriodic() {
           
           
    }

    public void teleopInit() {
           
    }

    /**
    * This function is called periodically during operator control
    */
    public void teleopPeriodic() {
   
            xAxis = drive.getX();
            yAxis = drive.getY();
            slider = drive.getRawAxis(3);
           
            sliderMath = Math.abs((slider-1)/2);
           
            if (Math.abs(xAxis) < 0.25) {
                    xMath = 0;
            }
            else {
                    xMath = Math.signum(xAxis)*(Math.abs(xAxis) - .25)*1.333*sliderMath;
            }
           
            if (Math.abs(yAxis) < 0.25){
                    yMath = 0;
            }
            else {
                    yMath = Math.signum(yAxis)*(Math.abs(yAxis) - .25)*1.333*sliderMath;
            }
            if (drive.getRawButton(2)){
      chassis.arcadeDrive(yMath, xMath);
            }
     
    }
   
   
    public void testPeriodic() {
    }
}

Jared 13-01-2016 22:00
Re: JAVA RobotDrive Motors Signal Out of Sync
 
You can calibrate your speed controllers to fix this. If you look online, you can find a manual for your speed controller that should explain how.

FRCteam5837 13-01-2016 22:07
Re: JAVA RobotDrive Motors Signal Out of Sync
 
But when I go into reverse the motor that starts first switches to the other motor; it isn't motor specific or even controller specific. More so which virtual motor it correlates to. Would calibrating the motors still fix this?

Jared 13-01-2016 22:10
Re: JAVA RobotDrive Motors Signal Out of Sync
 
Quote:
Originally Posted by FRCteam5837 (Post 1523208)
But when I go into reverse the motor that starts first switches to the other motor; it isn't motor specific or even controller specific. More so which virtual motor it correlates to. Would calibrating the motors still fix this?
That makes sense if the controllers aren't calibrated.

The PWM controllers have a small deadband where they will give no power. If one controller considers the zero point to be slightly ahead of where it should be, it will be late to start when going forward and early to start when going backward.

FRCteam5837 13-01-2016 22:14
Re: JAVA RobotDrive Motors Signal Out of Sync
 
Even if when I change motor controllers, meaning the on that previously started before and the one that started later are switched, the problem still happens with the same virtual motor.

Jared 13-01-2016 22:27
Re: JAVA RobotDrive Motors Signal Out of Sync
 
Try calibrating the joystick?

FRCteam5837 13-01-2016 22:30
Re: JAVA RobotDrive Motors Signal Out of Sync
 
We have used the slider Axis on the front bottom in order to have no side to side input and the problem still occurred. Also we have a dead zone and using the control panel to have it as centered as possible it still happened. I'm wondering if the error is inside the RobotDrive function provided by FIRST that one motor doesn't start as soon. Thank you for helping, all ideas help; We will definitely calibrate them first thing tomorrow as well.

virtuald 14-01-2016 00:02
Re: JAVA RobotDrive Motors Signal Out of Sync
 
Sounds like something is lagging. I would try disabling the camera stuff.

Joe Ross 14-01-2016 00:54
Re: JAVA RobotDrive Motors Signal Out of Sync
 
What type of speed controller are you using?

FRCteam5837 14-01-2016 07:59
Re: JAVA RobotDrive Motors Signal Out of Sync
 
Victor SP controllers, and the camera isn't currently being used but I'll definitely comment it out for now.

virtuald 14-01-2016 10:33
Re: JAVA RobotDrive Motors Signal Out of Sync
 
Quote:
Originally Posted by FRCteam5837 (Post 1523382)
Victor SP controllers, and the camera isn't currently being used but I'll definitely comment it out for now.
Well, there's your problem. You created Victor objects, not VictorSP objects. Try changing them to VictorSP.

FRCteam5837 14-01-2016 11:44
Re: JAVA RobotDrive Motors Signal Out of Sync
 
I'll change that, would that cause the motors to be set different values?

virtuald 14-01-2016 12:07
Re: JAVA RobotDrive Motors Signal Out of Sync
 
Yes, the PWM timing is different.


All times are GMT -5. The time now is 02:56.
Page 1 of 2 1 2 >
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi