radio configuration
 

I have try to config the new radio, but when i lunch the FRC Radio Configuration , i don't show any network interfaces, but I can acces to radio in navigator. I have try many PC, many cable and all time the same problems, thanks for your help.

Re: radio configuration
 

Hello,

I followed this guide directly from the Andy Mark webpage.

http://files.andymark.com/OM5P-AN_QuickAP_Setup.pdf

The process was extremely smooth. If you have trouble, let me know and I may be able to assist.

Re: radio configuration
 

Here is another set of instructions for using the standard FRC Radio Configuration Utility for this year. Notice it is not installed with the LabVIEW update this year.

http://wpilib.screenstepslive.com/s/...o-for-home-use

What do you mean by navigator? Have you tried disabling your firewalls?

Re: radio configuration
 

I can confire the radio at 192.168.1.1 but in FRC Radio Configuration, I see this :

Re: radio configuration
 

What Operating System do you use? Do you have the latest version of Java? Try disabling your computer's firewall. You should be able to see the network interfaces without being connected to the radio.

Re: radio configuration
 

Maybe you need to run as Admin?
Check your Network Connections and make sure your network connection is enabled.
Control Panel\Network and Internet\Network Connections

Re: radio configuration
 

I uses win 7 x64 and I have disable the firewall and connection is enable, I have java but i'm not sure if is really active.

Re: radio configuration
 

what worked for us:
-Run as Admin
-ethernet cable connected to the edge of the router, not the middle one

Re: radio configuration
 

We do this, but we have always the problems.

Re: radio configuration
 

My guess is that the configuration tool is not happy with a French-localized version of Windows.

Re: radio configuration
 

Finally windows in french is the problems, but now, i have this new error message :