Chief Delphi - Dimensions of Field?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Dimensions of Field? (http://www.chiefdelphi.com/forums/showthread.php?t=141862)

isaacaddis

16-01-2016 13:38

Dimensions of Field?

Has anybody found the distance between the Outer Works and the edge of the tower as marked by "x" is in the figure?

Thanks:cool:

PowerfulKitty

16-01-2016 17:22

Re: Dimensions of Field?

While that value isn't explicitly given in the manual, its easy to find by subtraction. If you can't do that math then good luck building a robot.

protoserge

16-01-2016 22:03

Re: Dimensions of Field?

1 Attachment(s)

As best I can tell, it is about 135". I took this based on the line you made and referenced the field at the nearest feature.

protoserge

18-01-2016 05:44

Re: Dimensions of Field?

OP, Did that help you? Do you need a different measurement?

HolyHacker335

19-01-2016 09:37

Re: Dimensions of Field?

Look here: https://firstfrc.blob.core.windows.n...Components.pdf
for the tower and batter dimensions and then throw in the field element distances and that should get you what you want.

All times are GMT -5. The time now is 22:10.