Chief Delphi - Frame Perimeter Restrictions?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Frame Perimeter Restrictions? (http://www.chiefdelphi.com/forums/showthread.php?t=142016)

Frc4741Rvhs

17-01-2016 20:54

Frame Perimeter Restrictions?

Not sure if this has been asked yet, but just to make sure. Do the frame perimeter restrictions include the bumpers or not?

dellagd

17-01-2016 20:56

Re: Frame Perimeter Restrictions?

The bumpers are separate entities from the frame perimeter. Specifically if you're asking whether or not the 120" perimeter limit includes the width of the bumpers, then no it does not.

Boltman

17-01-2016 20:56

Re: Frame Perimeter Restrictions?

R2 The ROBOT must have a FRAME PERIMETER, contained within the BUMPER ZONE, that is comprised of fixed, non-articulated structural elements of the ROBOT. Minor protrusions no greater than ¼ in. such as bolt heads, fastener ends, and rivets are not considered part of the FRAME PERIMETER.

Frc4741Rvhs

19-01-2016 19:19

Re: Frame Perimeter Restrictions?

Thanks for all of the help guys, this clarifies our question.

All times are GMT -5. The time now is 04:27.