Chief Delphi - 24 inch Bumper clarifcation

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - 24 inch Bumper clarifcation (http://www.chiefdelphi.com/forums/showthread.php?t=142083)

Streetbots

18-01-2016 18:20

24 inch Bumper clarifcation

From what I understood about scaling the tower is that the bumper should be above 24 inches. Does this include all of the bumpers on the robot or just one edge of the robot? Any information will be appreciated.

Ty Tremblay

18-01-2016 18:24

Re: 24 inch Bumper clarifcation

Straight from the manual:

Quote:

A ROBOT has SCALED the TOWER if, at the conclusion of the MATCH, the ROBOT:
A. is in contact with a unique RUNG, and
B. has all of its BUMPERS fully above the height of the low GOALS.

homerun33ss

18-01-2016 18:24

Re: 24 inch Bumper clarifcation

In the Gloassary of the rules manual, it defines SCALE as:

Quote:

an act performed by a ROBOT, such that at the conclusion of the MATCH, it is fully supported by the TOWER, is in contact with at least one RUNG, and has all of its BUMPERS fully above the height of the low GOALS.

All times are GMT -5. The time now is 15:52.