![]() |
Talon SRX Firmware Update Error
Hey everyone,
We're trying to update one of our SRXs from v. 1.1 to 2.0, but we're getting the error 80040383. I've looked around but I can't figure out exactly what this means. Does anyone have any ideas as to what it is and how to resolve it? |
Re: Talon SRX Firmware Update Error
Screenshot? (either on this post or just send an email to support@crosstheroadelectronics.com).
|
Re: Talon SRX Firmware Update Error
|
Re: Talon SRX Firmware Update Error
You have to hotlink when posting from Imgur.
http://i.imgur.com/hLEfPVp.png Edit: But that screenshot is a tad large and will stretch the page, I removed the img tag. |
Re: Talon SRX Firmware Update Error
I just sanity checked flashing my talon down to 1.1 and back up to 2.0 so no problems there.
Which browser is that? If you cleanly close/reopen the browser, does Talon4 still show up. If you check the Light Device LED and press save, does the Talon rapid-blink it's LEDs (just a soft check that the browser is working and wiring is good?). |
Re: Talon SRX Firmware Update Error
Turns out it was a false alarm, something had come loose while we were connected so we didn't have any CAN communications whatsoever even though all the talons were displayed on the application. Updating firmware on a nonexistent talon proves to be quite difficult. Sorry for the mixup.
|
Re: Talon SRX Firmware Update Error
No Prob, that's why manually refreshing the browser is helpful to sanity check the live-ness of things.
|
| All times are GMT -5. The time now is 02:56. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi