FRC 5817 Shooter Prototype Reveal: Asset 003
 

After having a lot of success with our shooter prototype, we put together a short video showcasing it.

You can watch Asset 003 in action here.

The shot in the video was taken from 22 feet away, about the distance required to shoot from the outer works. And for anybody wondering, the name "Asset 003" was derived from the part number we gave the shooter in CAD.

Re: FRC 5817 Shooter Prototype Reveal: Asset 003
 

I like the name! :-)

Re: FRC 5817 Shooter Prototype Reveal: Asset 003
 

How did it do that? Did you put some kind of odd spin on the ball?

Re: FRC 5817 Shooter Prototype Reveal: Asset 003
 

question: how do i post a new post in chief delphi?(sorry for bad english)

Re: FRC 5817 Shooter Prototype Reveal: Asset 003
 

Go to forums on the top left, pick the appropriate forum/sub-forum, scroll to the bottom, and there should be a "New Thread" button on the left.

I would say that this is off-topic and you should start a new thread, but... ;)

Re: FRC 5817 Shooter Prototype Reveal: Asset 003
 

This isn't really a reveal, since the mechanism is nowhere to be seen. You apparently just showed us you shooter prototype isn't the most accurate... :confused:

Re: FRC 5817 Shooter Prototype Reveal: Asset 003
 

I thought they were revealing their team's version of the field components...

Re: FRC 5817 Shooter Prototype Reveal: Asset 003
 

Actually Michael the shooter prototype they are running is very accurate. The base that the prototype is mounted to is slightly uneven and tends to wobble and the slightest degree difference will mess up the shot. Because it shoots pretty much a straight linear shot, wherever it is aiming it is going to hit. This was just one of the cooler shots that they made with it. I have been browsing other videos around and it is by far the hardest most linear shot that I have seen, and the distance shot from is pretty far too.

Re: FRC 5817 Shooter Prototype Reveal: Asset 003
 

Nope no spin on the ball just a hard shot to the right corner.

Re: FRC 5817 Shooter Prototype Reveal: Asset 003
 

By posting it under "5817 shooter prototype"???

Re: FRC 5817 Shooter Prototype Reveal: Asset 003
 

Looking at the field assembly drawings, isn't the distance more like 15 ft, or even less if just your back bumpers are over the OUTERWORKS?

Re: FRC 5817 Shooter Prototype Reveal: Asset 003
 

From the low bar DEFENSE it is roughly 18-19 feet. So 22 feet at max motor speed & battery would give them margin of control, meaning that as the battery drains down they can still make the 18-19 foot shot at the end of the match.

Though I call shenanigans until the shooter itself is in the camera view ;). With shooters, the devil is always in the details and not the over-arching design.

Re: FRC 5817 Shooter Prototype Reveal: Asset 003
 

Ah yes, 15 ft would be the minimum for an OUTERWORKS shot. Thanks.

Could you post a piture of the mechanism, i would like to see the how it compates to ours

Re: FRC 5817 Shooter Prototype Reveal: Asset 003
 

I don't have any pictures right now, but there are plenty of other threads on CD discussing other teams' prototype shooters.

Here's a few to get you started:
http://www.chiefdelphi.com/forums/sh...d.php?t=142059
http://www.chiefdelphi.com/forums/sh...d.php?t=142090
http://www.chiefdelphi.com/forums/sh...d.php?t=142020

You can also check out this subforum for more.