Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)
-   -   Bumper Zone Alignment (http://www.chiefdelphi.com/forums/showthread.php?t=142254)

mama_tree 21-01-2016 11:06

Bumper Zone Alignment
 
Someone please help us-

Our team is split as to whether their bumper plan is legal.

The frame perimeter for our design has the front and rear corner bumpers at two different elevations. (still within the bumper zone requirements)

notmattlythgoe 21-01-2016 11:07

Re: Bumper Zone Alignment
 
Quote:

Originally Posted by mama_tree (Post 1527773)
Someone please help us-

Our team is split as to whether their bumper plan is legal.

The frame perimeter for our design has the front and rear corner bumpers at two different elevations. (still within the bumper zone requirements)

There are no rules that state the bumpers must all be at the same level, as long as they are in the bumper zone they are legal.

Matt C 21-01-2016 11:16

Re: Bumper Zone Alignment
 
Quote:

R22 BUMPERS must be located entirely within the BUMPER ZONE, which is the volume contained
between two virtual horizontal planes, 4 in. above the floor and 12 in. above the floor, in reference
to the ROBOT standing normally on a flat floor. BUMPERS do not have to be parallel to the floor.
Emphasis is mine, the bumpers don't even have to be parallel to the floor, they just have to exist, in the correct construction per the other bumper rules, between 4 and 12 inches from the ground.

mama_tree 21-01-2016 11:41

Re: Bumper Zone Alignment
 
Thanks Matt! I should have just called or emailed you :)

notmattlythgoe 21-01-2016 11:44

Re: Bumper Zone Alignment
 
Quote:

Originally Posted by mama_tree (Post 1527796)
Thanks Matt! I should have just called or emailed you :)

No problem, you know how to reach me!


All times are GMT -5. The time now is 11:32.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi