Encoder for 9015 Motor
 

Hi Everyone,

With the success of the RS7 encoder for the 775pro motor, we have duplicated the design for the AndyMark 9015 Motor (am-0912). The RS5 uses the same mounting, board, and strain relief as the previous design, just a bit smaller to fit the 550 series motor. On the website we added a drop down menu to select the different versions. Also added a datasheet for the sensor IC and an installation instructions. Keep in mind that these are not generic designs and are not tested on the Banebots 550 and 775 motors.

http://www.armabot.com/encoders.html

Have fun with those robot designs!

Re: Encoder for 9015 Motor
 

Your website has the am part number incorrectly listed as am-9012.

Re: Encoder for 9015 Motor
 

I think The AndyMark 9015 really is part number AM-9012 AM-0912. The 9015 designation is historical; there was a Fisher-Price motor marked 9015 included in the KoP, back in the day. That motor was popular because of its peak power.

Re: Encoder for 9015 Motor
 

The armabot website has the AndyMark 9015 motor listed as P/N am-9012. That is not the correct AndyMark part number for that motor. See attachment.

Re: Encoder for 9015 Motor
 

Got it fixed, thanks for spotting that and sorry about the confusion.

Re: Encoder for 9015 Motor
 

Has anyone used these before? How well did they work? Any issues? Thanks.