PLEASE HELP-Labview Connection
 

Can anybody help us? :]
We were following this tutorial:
https://wpilib.screenstepslive.com/s...p-test-program
When we try to run Labview main.vi the error message says "Connection failed. The network address might be invalid or the target is not responding."
:confused:

Re: PLEASE HELP-Labview Connection
 

Is your Driver Station app running?
In the Driver Station there are status lights that tell you what can be detected.
It's one of the tabs on the left, the second one down (Diagnostics).
Check those and tell us which ones are green:

• Enet Link - means an Ethernet cable is detected
• Robot Radio - means the Open Mesh radio is detected
• Robot - means the roboRIO is detected

How are you connecting the laptop to the roboRIO?

Re: PLEASE HELP-Labview Connection
 

Ethernet link is the only one that is lit up.

Re: PLEASE HELP-Labview Connection
 

And the Ethernet cable is connected to ...what?

Re: PLEASE HELP-Labview Connection
 

Nevermind, our coach almost started crying because we got it to work!!! :] :]
Now we get to celebrate with candy
Thanks for the help :)

Re: PLEASE HELP-Labview Connection
 

Send candy!