Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)
-   -   Pneumatics Control Module Requirement (http://www.chiefdelphi.com/forums/showthread.php?t=142598)

Abelbae 26-01-2016 17:22

Pneumatics Control Module Requirement
 
This year, our team is not using any pneumatic devices in any of our systems. So, do we need to have a pneumatic control module on the robot, or can we take it off? I'm asking this see if we can save space, and eliminate another device from the CAN chain.

Omar 26-01-2016 17:35

Re: Pneumatics Control Module Requirement
 
Quote:

Originally Posted by Abelbae (Post 1530520)
So, do we need to have a pneumatic control module on the robot, or can we take it off?

Yes you can take it off, you do not have to have the PCM if you are not using pneumatic.

FrankJ 26-01-2016 17:47

Re: Pneumatics Control Module Requirement
 
If you are not using the module, you can leave it off.


All times are GMT -5. The time now is 11:04.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi