Re: PDP Lights are flashing Orange
 

Did you do all the previous suggestions?

Is it setup with only the RoboRio and PDP?
Are the Can cables installed properly?
Is the termination jumper set correctly?
What firmware revision is installed on the PDP? RoboRio?
Browser you are using to access the RoboRio webdashboard?

You might want to read through the links I posted earlier. This one specifically http://wpilib.screenstepslive.com/s/...ribution-panel

You will want to look at what sticky fault is being logged to help narrow down what the issue is.

Post some screen shots of the self test results.

Hope this gets going for your soon.

Re: PDP Lights are flashing Orange
 

We fixed it! Thanks everybody!

Re: PDP Lights are flashing Orange
 

So, what was the fix? Others may run into a similar problem, and a detailed posting of the root cause and what you did to fix it could help them a lot. Simply posting that it's suddenly magically fixed doesn't really help everyone else.

Re: PDP Lights are flashing Orange
 

Well so at first the double-clicking self test on the PDP didnt work, so I re-imaged the roborio and pressed the self test rapidly for about 10 seconds and it was green.

Re: PDP Lights are flashing Orange
 

Agreed!

Especially after many went through multiple efforts to help.

It's what many of us are on here to do, so please post what the resolution was.

We love to learn too. :D

Glad its going,

Aloha

P.S. We will be at the Orlando Regional and I would like to stop by your pit and see what you have accomplished.

Re: PDP Lights are flashing Orange
 

Unfortunately I wont be at the orlando regional because I'll be in New York for a few days, but I'm sure you'll be able to ask anyone on my team and they'll show you everything you wanna know!

Re: PDP Lights are flashing Orange
 

Any chance you are going to post what resolved the problem?

This will be helpful to others as well as inform us that our troubleshooting was sufficiently helpful.

Thank you