Kick butt wheels
 

i know that there was a post about this earlier, but i would like to use thtis post exclusively for pics of wheels and drive-trains:

151-
[IMG]C:/Desktop/Greg/goodwheel1.jpg[/IMG]

Your trying to link a picture from your home computer. Try and upload it to a website then post it or post it as an attached file.

And your slashes are even backwards...*unix and win COMBINE* muahaha.

Check this thread for a pic

My incompentant friend Badjokeguy lacks the knowledge to post a picture so heres a thread with a picture of the wheel in it.

http://www.chiefdelphi.com/forums/pi...10&quiet=quiet thats a pic of our wheels, version 1.0 that is, then we created spikes to cover the entire wheel, anyone who watched the early practice rounds on curie at nationals knows how well, the judges loved those wheels : ) ,that was version 2.0, then after the judges kicked us off the feild after 30 seconds of our first practice round, we realised we need to change them, or be forced to resort back to version 1.0, what we came up with was to place strips of neopreme in between each row of spikes, and hold it in place by pushing the spikes closed.

heres a pic of one row of spikes that we cut off because they were too big around the wheel

there are about...100 rows of these 1/4 inch spikes so approximately, 4200 total on both wheels. as you can see, each has 3 teeth, don't you wish you has as much fun as we did making those?? i'll find a nice picture of the finished product (version 2.2) and post it here