Chief Delphi - Motor Buttons

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - Motor Buttons (http://www.chiefdelphi.com/forums/showthread.php?t=143240)

Kitkat

05-02-2016 17:48

Motor Buttons

HI!!

How do I program a motor to a button? We have always used axis for motors and don't know how to use buttons for the motors. Could someone post code so I can see how it is done?

Thanks in Advance 3750!!

Nevada Reno

05-02-2016 18:56

Re: Motor Buttons

you have to use an index array connected to button wires then add a constant for the button (0 btn 1,1 btn 2,etc) I hope this helps we are stuck on pneumatics which is farther along
:) :) :) :) :)

Mark McLeod

05-02-2016 22:28

Re: Motor Buttons

1 Attachment(s)

You have to decide what you'd like the motors to do.
Here's one way:

rich2202

06-02-2016 00:14

Re: Motor Buttons

It looks something like this:

Quote:

x=isbuttonpressed();
if(x) {
setmotorspeed(SPEED);
} else {
setmorospeed(0);
}

You need to put in the code for checking to see if the button is pressed, and how to set the motor speed for your motors.

orangemoore

06-02-2016 01:22

Re: Motor Buttons

Quote:

Originally Posted by rich2202 (Post 1535826)

It looks something like this:

You need to put in the code for checking to see if the button is pressed, and how to set the motor speed for your motors.

FYI this is in the Labview sub-forum.

All times are GMT -5. The time now is 02:04.