Chief Delphi - Talon srx programming

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - Talon srx programming (http://www.chiefdelphi.com/forums/showthread.php?t=143276)

2386programming

06-02-2016 10:24

Talon srx programming

How would I program a talon srx to ramp our speed? Also how to I program it in the begin vi? We are using labview

ItsAMeNick

06-02-2016 11:37

Re: Talon srx programming

Quote:

Originally Posted by 2386programming (Post 1535901)

How would I program a talon srx to ramp our speed? Also how to I program it in the begin vi? We are using labview

The easiest way would be to use an "x squared" input for your joystick.
It would give you a large range control. If you think this would work I could provide more information.

Ether

06-02-2016 12:33

Re: Talon srx programming

Quote:

Originally Posted by ItsAMeNick (Post 1535927)

The easiest way would be to use an "x squared" input for your joystick.

That just changes the joystick sensitivity. It wouldn't ramp the speed.

See Section 6 "Setting the Ramp Rate" in the Talon SRX Software Reference Manual.

EDIT: if you aren't using CAN to command the SRX, you can do the ramping in your roboRIO code.

All times are GMT -5. The time now is 04:16.