Chief Delphi - Reflective Parts

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Reflective Parts (http://www.chiefdelphi.com/forums/showthread.php?t=143500)

Reflective Parts

Hey team 3036 was wondering if there was any reflective material on the towers for vision tracking during the autonomous period.
Thanks,
3036

Re: Reflective Parts

Only the same reflective material mentioned in the rule manual that's always on the tower...

per the rule manual

Quote:

Each of the high GOALS is marked with two (2) vertical strips of 2 in. retro-reflective material (3M
8830 Silver Marking Film) and one (1) horizontal strip of 2 in. retro-reflective material (with the
unsupported .25 in. folded over the bottom edge of the GOAL opening such that 1.75 in. is visible)
to form a u-shaped target. The targets are 1 ft. 2 in. tall and 1 ft. 8 in. wide.

A picture is shown in diagram 4-29 of the rule manual.

Re: Reflective Parts

Thanks for the help!!! ;)
Thanks,
3036