Chief Delphi - Gearing and Drive Motors

Page 1 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Gearing and Drive Motors (http://www.chiefdelphi.com/forums/showthread.php?t=143780)

JacobD

13-02-2016 14:17

Gearing and Drive Motors

After seeing my team's robot drive, I have begun to consider changing up the motors in out drive train. But, I want to see what the CD consensus is before I do so. What are you putting on your robot?

thinker&planner

13-02-2016 14:48

Re: Gearing and Drive Motors

Andymark gearboxes aren't the only ones out there.

Maybe instead of having the gearbox name, have something like "2 CIM 15feet/sec." That is, unless you want to know what specific gearboxes people are using.

jamesmcip

13-02-2016 15:34

Re: Gearing and Drive Motors

We're using 2 cims per side with independent middle wheels running mini cims in a tougbox mini.

JacobD

13-02-2016 15:44

Re: Gearing and Drive Motors

Quote:

Originally Posted by thinker&planner (Post 1539697)

Andymark gearboxes aren't the only ones out there.

I just figured that I would put these two gearboxes because the majority of robots that I have seen use these two gearboxes.

GeeTwo

13-02-2016 21:34

Re: Gearing and Drive Motors

I doubt you will see many CIMple box robots this year. Even with 4" wheels, they are geared too fast (15+fps) for this game with ramps and obstacles and obstructions that give you few opportunities to drive more than 20 feet in a relatively straight line.

We're gearing our TB-minis all the way down to 12.75 on a 4" wheel, then farther down with chain to our 8" wheels. It's a top speed of only 5.6 fps, but we reach it practically instantly and eat most of the defenses for breakfast, and the others for lunch.

The Doctor

13-02-2016 21:39

Re: Gearing and Drive Motors

We've got 2 CIMs per side running AndyMark SuperShifters.

Fusion_Clint

13-02-2016 22:52

Re: Gearing and Drive Motors

2 CIMS per side geared for approximately 9.8 FPS

ttldomination

13-02-2016 23:34

Re: Gearing and Drive Motors

Quote:

Originally Posted by GeeTwo (Post 1539905)

We're gearing our TB-minis all the way down to 12.75 on a 4" wheel, then farther down with chain to our 8" wheels. It's a top speed of only 5.6 fps, but we reach it practically instantly and eat most of the defenses for breakfast, and the others for lunch.

At that speed, you won't be eating very many.

- Sunny G.

nakarsten

13-02-2016 23:42

Re: Gearing and Drive Motors

WCP DS Shifter with 2 CIMS per side

MaGiC_PiKaChU

13-02-2016 23:45

Re: Gearing and Drive Motors

CIMs are overrated :rolleyes:

PowerfulKitty

14-02-2016 00:06

Re: Gearing and Drive Motors

2 CIMs per side with VexPro single speed double reduction gearboxes.

AllenGregoryIV

14-02-2016 00:16

Re: Gearing and Drive Motors

We're using 2 CIMs per side in a gearbox based off 1114's 2014 Gearbox.

philso

14-02-2016 00:19

Re: Gearing and Drive Motors

Quote:

Originally Posted by GeeTwo (Post 1539905)

It's a top speed of only 5.6 fps, but we reach it practically instantly and eat most of the defenses for breakfast, and the others for lunch.

Will your robot make it to the tower by dinner time? :D

See you at Bayou. We are looking forward to having fresh beignets again.

GeeTwo

14-02-2016 01:03

Re: Gearing and Drive Motors

Quote:

Originally Posted by philso (Post 1539976)

Will your robot make it to the tower by dinner time? :D

Wouldn't miss it!

Quote:

Originally Posted by philso (Post 1539976)

See you at Bayou. We are looking forward to having fresh beignets again.

Wouldn't miss it!

philso

14-02-2016 01:17

Re: Gearing and Drive Motors

Quote:

Originally Posted by GeeTwo (Post 1539989)

Wouldn't miss it!

There is a Cafe Du Monde between our hotel and the Pontchartrain Center. Hopefully I can save one for you.

All times are GMT -5. The time now is 21:28.

Page 1 of 2

Show 100 post(s) from this thread on one page